Negotiable
The date of payment from buyers deliver within days
Guangdong
Long-term effective
2022-07-17 16:26
454
Company Profile
By certification [File Integrity]
Contact：Jim Zhu(Mr.)
Email：
Telephone：
Phone：
Area：Guangdong
Address：Guangdong
Quad channel high-side driver with CurrentSense analog feedback for automotive applications
Max transient supply voltage |
VCC |
40 V |
Operating voltage range |
VCC |
4 to 28 V |
Typ. on-state resistance (per Ch) |
RON |
50 mΩ |
Current limitation (typ) |
ILIMH |
27 A |
Stand-by current (max) |
ISTBY |
0.5 µA |
• Automotive qualified
• General
– Quad channel smart high-side driver with CS analog feedback
– Very low standby current
– Compatible with 3 V and 5 V CMOS outputs
• CurrentSense diagnostic functions
– Analog feedback of load current with high precision proportional current mirror
– Overload and short to ground (power limitation) indication
– Thermal shutdown indication
– OFF-state open-load detection
– Output short to VCC detection
– Sense enable/disable
• Protections
– Undervoltage shutdown
– Overvoltage clamp
– Load current limitation
– Self limiting of fast thermal transients
– Configurable latch-off on overtemperature or power limitation with dedicated fault reset pin
– Loss of ground and loss of VCC
– Reverse battery with external components
– Electrostatic discharge protection
• All types of Automotive resistive, inductive and capacitive loads
• Specially intended for Automotive Signal Lamps (up to P27W or SAE1156 or LED Rear Combinations)
The device is a quad channel high-side driver manufactured using ST proprietary VIPower® M0-7 technology and housed in PowerSSO-16 package. The device is designed to drive 12 V automotive grounded loads through a 3 V and 5 V CMOS-compatible interface, providing protection and diagnostics.
The device integrates advanced protective functions such as load current limitation, overload active management by power limitation and overtemperature shutdown with configurable latch-off.
A FaultRST pin unlatches the output in case of fault or disables the latch-off functionality.
A sense enable pin allows OFF-state diagnosis to be disabled during the module low-power mode as well as external sense resistor sharing among similar devices.
http://www.1-core.com/
